Adjustable Terrace Pedestal 115-220mm for stone slab with 4mm gap, DAKOTA

The DAKOTA family of adjustable terrace pedestals consists of six pedestal models and three extension models:

• Adjustable terrace pedestal 10 mm to 20 mm

• Adjustable terrace pedestal 18 mm to 36 mm

• Adjustable terrace pedestal 35 mm to 60 mm

• Adjustable terrace pedestal 60 mm to 115 mm

• Adjustable terrace pedestal 115 mm to 220 mm

• Adjustable terrace pedestal for sloped surfaces 41 to 66 mm (slope up to 5%)

• Terrace pedestal extensions: 25, 50, and 100 mm

For noise reduction and to even out minor surface irregularities, we recommend using a rubber underlay pad (200x200x3 mm).

MATERIAL: Polypropylene (PP)

LOAD CAPACITY: At least 800 kg, and 670 kg for the sloped-surface pedestal

OPERATING CONDITIONS: Weather-resistant from -40 to +80 °C

APPLICATION: Used as support posts for terrace substructures. Suitable for installation on flat, solid surfaces such as flat roofs, paving slabs, construction blocks, compacted gravel, or crushed stone.

HEIGHT RANGE: 10 mm to 220 mm, up to 1000 mm with extensions

COMPONENTS: The product consists of a base, a rotating nut, and a head with a single fastening edge for the joist.

TIP: The pedestal base is equipped with water drainage channels. The diameter of the pedestal base is 200 mm, covering 314 cm².

When installing the pedestal near a wall or in a corner, the base can be easily trimmed to a smaller size.
Special cutting points are molded into the base for this purpose.